Metal roofing
Architectural shingles
Tile roofing
GAF
Owens Corning
Flat & low-slopeFree roof inspection with deck photos before we talk money - GAF and Owens Corning certified installation
Trusted Metal Roofing for Winchester Homeowners
Metal roofing is the one roof type that makes sense in Winchester’s climate. We get summer highs that bake asphalt shingles until they curl and crack, then wind that finds every lifted edge. On the east side, near the Whitney Mesa side of town, we also see monsoon gusts that peel back lighter roofing and send homeowners looking for something stronger. Metal holds up where other materials wear out, and it’s why so many Winchester homes are making the switch.
Our technicians have up to 30 years of experience setting, repairing and coating metal roofs, and every job carries our 90-Day Done Right Promise in writing. A live person answers our phone 24/7, so call (844) 797-8167 and tell us what your roof is doing.
What Our Metal Roofing Service Includes
Every metal job starts with a real look at your deck, your pitch and your existing underlayment. We don’t quote a metal roof over the phone before someone has stood on your property and counted the squares. Here’s what each part of the work looks like.
Standing Seam Metal Roof
Standing seam is the concealed-fastener metal roof with raised vertical ribs, and it’s the best option when you want a clean, long-lasting roof that sheds debris and monsoon rain. You need it when you’re replacing an old shingle roof and want something that will outlast the house’s mortgage. In Winchester, we measure the panels on site so the seams follow the rafter lines, then fasten them with concealed clips that let the metal expand through our big temperature swings without popping loose.

Metal Shingle Roofing
Metal shingles give you the look of a traditional shingle roof with metal’s durability, and they suit homeowners in neighborhoods near the Winchester cultural district who want to keep the historic feel of the street. You need them when your HOA or neighbors push back on a standing seam look but you still want metal’s strength. We set metal shingles over a proper high-temp underlayment, because our desert sun cooks standard felt.

Corrugated Metal Roofing
Corrugated metal is the wavy, exposed-fastener panel that costs the least of the metal options, and it’s a solid fit for sheds, patio covers, carports and ranch-style homes around Winchester. You need it when budget matters more than a hidden-fastener look and you want a roof that will still hold up for decades. We use thick-gauge panels and zipper screws with EPDM washers so the fasteners don’t back out in the heat.

Aluminum & Steel Roofing
Aluminum resists rust and is light on the structure, while steel gives you toughness and a lower price. Both work in Winchester, but the choice matters here – our dry, dusty climate is kind to both, while coastal rust isn’t a concern, so the decision comes down to weight, cost and how the panels hold paint under the sun. We walk you through the trade-off on your own roof before you commit.
Metal Roof Repair
Metal roof repair covers lifted seams, backed-out fasteners, punctures, failed sealant and panels damaged by wind or a fall. You need it after a monsoon pushed a seam apart or when you spot a rust stain under a fastener. We find the problem first – sometimes a leak that looks like a roof issue is a flashing or vent detail – and we fix that specific spot instead of selling you a whole new roof.
Metal Roof Coating
Metal roof coating is an elastomeric or reflective coating that seals small cracks, blocks UV and gives an older metal roof a fresh reflective surface. You need it when your metal roof is sound but fading, chalky, or letting heat into the attic. In Winchester, a reflective coating can shrink the heat load on a metal roof noticeably, and we prep the surface properly so the coating actually bonds instead of peeling off in a year.
Styles & brands we work with
- Architectural shingles
- Metal roofing
- Tile roofing
- GAF
- Owens Corning
- Flat & low-slope
Brands We Service for Metal Roofing
We work with metal panel and accessory names our customers already ask about, and we know where each one tends to give trouble. IKO panels and accessories come through our hands often, and we know their fastener spacing and edge detail so a repair blends with the original install. Boral makes a metal shingle line we’re familiar with, and we know which profiles show wear at the ridge and valleys first.
Atlas and Tamko show up in our area too, and we can source compatible trim, screws and underlayment for the repairs and installs we do. We’re not going to tell you we keep every part on the truck – nobody does – but whether you have IKO, Boral or any other make, we can help. Ask Bill’s crew to look at what’s up there before you decide what to do with it.
Signs You Need Metal Roofing Right Now
- Rust or white chalky streaks on the panels. A little surface rust is treatable with a proper coating, but rust that’s eaten through a panel means water is already getting under your roof. Catch it while it’s a repair instead of a full replacement.
- Lifted or separated seams. Winchester’s wind finds the weak spots. Once a standing seam lifts, the next storm pushes water up and under it, so a seam that stands up when you press it needs attention fast.
- Backed-out or missing fasteners. On exposed-fastener roofs, screws work loose as the metal moves through the heat cycle. Missing fasteners leave open holes that leak directly into the deck.
- Water stains on your ceiling or attic deck. A leak from a metal roof often tracks sideways before it drips, so the wet spot inside doesn’t always sit right under the problem. We trace it back to the actual source.
- Panels that dent, flex or pull away. Denting and movement mean the panel is thin-gauge, over-fastened or the deck under it has softened. That’s a sign to look deeper than the metal itself.
Our Metal Roofing Process – Step by Step
- 1
Free inspection and a real measurement. We walk your roof, check the deck, take a moisture reading and count the squares by hand. A roof is measured in squares – ask any bidder how many they counted. You’ll see deck photos before we talk money.
- 2
Written, line-item estimate. You get a written quote that lists materials, panel type, underlayment, flashing and labor in separate lines, plus a free second opinion on any other written estimate you’re holding. The price you see is the price you agree to.
- 3
Prep and tear-off. Old roofing comes off and the deck gets inspected in daylight. Any soft spots are replaced before metal goes up, because a metal roof is only as good as the deck it sits on.
- 4
Installation. We set underlayment, panels, clips and fasteners to the maker’s spec and the local wind requirements. The nailing pattern earns the wind rating, not the shingle wrapper – the same rule applies to your fasteners and clips.
- 5
Final walk and the 90-Day Done Right Promise. We walk the finished roof with you, check flashing and seams, clean the site, and leave you the written promise. If something isn’t right in the first 90 days, one call brings Bill back.
See the difference
Before
After
Before
After
Before
AfterHow Much Does Metal Roofing Cost in Winchester?
Metal roofing in Winchester runs from about $8.50 to $15 per square foot installed for most homes, depending on the panel system and the roof’s complexity. A typical corrugated metal roof on a 1,500-square-foot home in Winchester runs $9,000 – $14,000, while a standing seam roof on the same house runs $16,000 – $26,000 because of the concealed fasteners and tighter install tolerances. Metal shingle roofs fall in the middle, often $13,000 – $21,000 for a standard ranch-style home. Metal roof repair is a different scale: a seam or fastener fix usually lands between $250 and $900, and a reflective coating on a mid-size roof runs $2,500 – $5,500.
What moves the price: your roof’s pitch and how many planes and valleys it has, whether old roofing has to come off, the panel gauge you choose, and whether the deck has soft spots. To avoid overpaying, get the square count from every bidder, ask what’s included in underlayment and flashing, and read the line items instead of just the bottom number. Our free estimate includes a written line-item quote, deck photos, and a free second opinion on any other bid – no trip charge inside our own county. Call (844) 797-8167 to schedule it.
| Metal Roofing Service | Typical Winchester Price Range |
|---|---|
| Corrugated metal roof (1,500 sq ft home) | $9,000 – $14,000 |
| Standing seam metal roof (1,500 sq ft home) | $16,000 – $26,000 |
| Metal shingle roof (standard ranch home) | $13,000 – $21,000 |
| Metal roof repair (seams, fasteners, flashing) | $250 – $900 |
| Reflective metal roof coating (mid-size roof) | $2,500 – $5,500 |
Metal Roofing Near Winchester – Our Service Area
We serve Winchester and the towns around it, from the neighborhoods near the Winchester Cultural District out toward Whitney, Paradise and Sunrise Manor, and across to Spring Valley, Enterprise and Henderson. Calls from inside our county get no trip charge, and we can usually get out to look at a metal roof in Winchester or a neighboring town within a few days. If your roof is in another part of the valley, our home page lays out where we work. For metal work in the eastern parts of the valley, see our Metal Roofing in Sunrise Manor page, and for the northwest side, Metal Roofing in Paradise.
Serving Winchester, NV – Our Local Coverage Area
We serve Winchester and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions – Metal Roofing in Winchester
Metal roofing is a roof system built from steel or aluminum panels or shingles instead of asphalt, tile or wood. It comes in several forms – standing seam with concealed fasteners, exposed-fastener corrugated panels, metal shingles that mimic other looks, and coated profiles – and each one is installed over an underlayment on a solid deck. In Winchester, metal is a common choice because it handles our heat, sun and wind better than most other materials. Call (844) 797-8167 to talk through which type fits your home.
Most metal roof installs in Winchester take about two to five days, depending on the size of the roof and the panel type. A simple corrugated roof on a smaller home can go faster, while a standing seam roof with lots of valleys, dormers and flashing takes longer. Weather can stretch the timeline, and we’ll tell you up front what to expect. Call (844) 797-8167 for a realistic date range after we’ve seen your roof.
Metal roofing in Winchester typically runs $8.50 to $15 per square foot installed, or roughly $9,000 to $26,000 for a full roof on a 1,500-square-foot home depending on the system. Repairs are much smaller – usually $250 to $900 for seams, fasteners or flashing. The exact number depends on your roof’s shape, the panel type and what’s underneath. Call (844) 797-8167 for an exact quote – estimates are free.
Yes, we work with Boral metal shingles, IKO panels and accessories, and we’re also familiar with Atlas and Tamko products common in the area. We can source compatible trim, fasteners and underlayment for the repairs and installs we do. We don’t claim to be a dealer for every brand, but we do know how each one goes together and where it tends to wear. Call (844) 797-8167 and tell us what’s on your roof.
A live person answers our phone 24/7, including nights and weekends after a storm, so call (844) 797-8167 whenever a metal roof is leaking or a panel has come loose. We’ll talk through what to do to limit damage until we can get out to look at it. Storm damage and wind-lifted panels are the cases where speed matters most. We’ll be there as soon as we can get to you.
Every metal roofing job we do is backed by our written 90-Day Done Right Promise – if something isn’t done right in those first 90 days, one call brings Bill back to make it right. On top of that, the metal panels and accessories carry the manufacturer’s own warranty, which varies by brand and product. We walk you through both in writing before the work starts. Call (844) 797-8167 for the details on your specific roof.
Before the crew arrives, clear the driveway and the area around the house, and move anything breakable away from exterior walls. Take pictures off the walls inside, since tear-off vibrates the house. Plan for the crew to need daytime access and a place to stage materials. We’ll confirm the schedule and answer questions before the day. Call (844) 797-8167 to lock in your date.
Schedule Your Metal Roofing Service in Winchester Today
If your metal roof is leaking, lifting at the seams or just past its prime, call Shepherd & Sons Roofing Winchester at (844) 797-8167 for a free, no-obligation estimate. We’ll show you deck photos before we talk money, hand you a written line-item quote, and stand behind every job with our 90-Day Done Right Promise. A live person answers 24/7. Ask us for a free second opinion on any other estimate you’re holding – and see our full Metal Roofing in Winchester page for the overview.
Written by the team at Shepherd & Sons Roofing Winchester.