Metal roofing
Architectural shingles
Tile roofing
GAF
Owens Corning
Flat & low-slopeFree roof inspection with deck photos before we talk money - GAF and Owens Corning certified installation
Fast, Reliable Metal Roofing Across Paradise
Metal roofing in Paradise isn’t the same job it is in the suburbs, and if a bidder doesn’t know that on day one, you’ve got the wrong bidder. The 89105 side of the Valley is dominated by flat and low-slope decks, so most of the metal work we scope here is standing seam or corrugated metal going over existing TPO, EPDM, or modified bitumen, not shingle tear-offs. We know the east-side wind patterns, we know which parapets fail first after a July or August microburst, and we’ll tell you what the deck underneath needs before we talk money. Call (844) 797-8167 for a free estimate on your Paradise property.
Why Shepherd & Sons Roofing Winchester Is Paradise’s Preferred Metal Roofing Company
Paradise owners and property managers come back to us because the estimate we write is the estimate they pay. No phone quote that grows legs at the door. Our technicians have up to 30 years of experience, and the 90-Day Done Right Promise goes in writing on every job – if something’s not right, one call brings us back.
We’re locally owned and owner-operated, and a live person answers the phone 24/7, including nights and weekends after a storm rolls through. No call center, no voicemail, no form that goes nowhere.
For Paradise work, local knowledge earns its keep. A mechanic can nail metal to a parapet all day long, but on these low-slope decks the details that matter are the slip sheet, the edge metal, and how the fasteners are set to current uplift requirements. That’s the part that gets scoped in the first walk-through, not discovered after the first monsoon.
Styles & brands we work with
- Architectural shingles
- Metal roofing
- Tile roofing
- GAF
- Owens Corning
- Flat & low-slope
Our Metal Roofing Services in Paradise
Standing Seam Metal Roof
Standing seam is our first recommendation for most Paradise retrofit work over an existing membrane. The raised seam keeps water moving off the low-slope deck, and it’s built to handle the thermal cycling that flat roofs here see day after day. We set a separation layer between the new metal and the old membrane so you’re not inviting galvanic corrosion down the road.

Metal Roof Repair
Repair calls on Paradise metal roofs usually trace back to two things: wind uplift at a parapet or corner after a monsoon microburst, and sealant or butyl tape at seams that’s dried out from UV. We assess the decking and existing underlayment first, then fix the flashing, edge metal, or fastener pattern so the repair actually holds. Please don’t climb up there yourself to chase a leak – the fall risk on a parapet edge is real, and metal surfaces get hot enough to burn.

Corrugated Metal Roofing
Corrugated metal is a solid fit for retail strips and multifamily buildings where you want a durable over-the-top system without the cost of a full tear-off. It works well on Paradise’s low-slope decks when it’s installed with the right fastening pattern, proper edge securement, and a slip sheet over the old membrane so the two materials don’t fight each other.

Aluminum & Steel Roofing
Aluminum and steel both hold up in the Mojave sun, but which one fits your building depends on the deck and what’s already underneath. Steel brings strength; aluminum handles corrosion better in some spots. We’ll walk you through both and tell you plainly which one makes sense for your Paradise property.
Trusted Brands We Service in Paradise
We install products from GAF, CertainTeed, Owens Corning, IKO, Atlas, Tamko, and Boral, and we’re familiar with how each one performs on a low-slope Paradise deck. We don’t stock parts – every job gets the right material ordered to fit the scope. That’s the honest way to do it. When a repair calls for a specific panel or trim piece, we source it, bring it out, and get your property closed up. Name the shingle or panel and we’ve likely set it.
See the difference
Before
After
Before
After
Before
AfterCommon Metal Roofing Problems We See in Paradise Homes
- Wind uplift at parapets and corners. After a July or August microburst, we regularly see edge metal and panels peeled back where fasteners weren’t set to current uplift requirements. That’s the failure pattern on Paradise’s low-slope roofs – not slow wear the way pitched residential roofs fail.
- UV degradation and thermal cycling at seams. The desert sun cooks sealant and butyl tape until it dries and cracks. Once it fails, water works its way in and panels start to loosen.
- Corrosion at cut edges and fastener points. When metal touches treated wood or an existing membrane without a separation layer, galvanic corrosion starts eating the panel from the cut edge inward.
- Water intrusion from transition details. On buildings with flat membrane decks and parapet edges, water finds its way in at transitions between old TPO or modified bitumen and the new metal – it’s why we scope the slip sheet and flashing before anything else.
Pricing for Metal Roofing in Paradise, NV
Honest numbers for Paradise, so you know what you’re looking at before anyone touches your roof. A typical standing seam retrofit over an existing membrane on a Paradise low-slope deck runs roughly $14 – $26 per square foot installed, slip sheet and edge metal included. Corrugated metal over an existing membrane runs about $9 – $17 per square foot. A metal roof repair at a parapet or seam typically runs $400 – $1,800 depending on the damage. What moves the price: deck condition, the height of the building, how much edge metal and flashing work is involved, and whether the existing underlayment needs to come off. Every Paradise estimate comes with a free second opinion on any written bid and no trip charge inside our own county. Call (844) 797-8167 for a free estimate.
We Also Serve Cities Near Paradise
We also handle metal roofing work in the surrounding communities. If you’re just outside Paradise, we cover Metal Roofing in Paradise and the neighboring towns of Winchester, Whitney, Spring Valley, and Enterprise. Same estimate process, same 90-Day Done Right Promise, whether you’re in Paradise or the next town over. Call (844) 797-8167 or ask our Metal Roofing team to come take a look.
Serving Paradise, NV – Our Local Coverage Area
We serve Paradise and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Metal Roofing in Paradise
Yes, and it’s the most common way we do it here. Most Paradise low-slope decks have TPO, EPDM, or modified bitumen under them, and the metal gets installed over the existing membrane with a separation layer or slip sheet to prevent galvanic corrosion and allow for thermal movement. The deck and underlayment get assessed first; if anything’s failing underneath, we tell you before we quote. Call (844) 797-8167 to schedule a walk-through.
You want a system engineered for uplift, not just a metal panel with a number on the wrapper. Paradise sits under monsoon downbursts that peel poorly-adhered single-ply and edge metal, so the fastening pattern and edge securement matter more than the panel’s marketing rating. Ask any bidder to show you how they’ll fasten the edges at parapets and corners, and call (844) 797-8167 for a free estimate.
It shapes the schedule noticeably. July and August bring sudden downbursts that make open decks dangerous and leave little margin for a seam or edge to be left undressed overnight, so we plan Paradise metal work to get panels and edge metal closed up before the afternoon weather builds. Wind ratings and seam integrity aren’t something to gamble on timing for. Call (844) 797-8167 to get on the schedule.
Usually yes. Most commercial and multifamily reroof work in Paradise requires a permit and inspection, and the fastening pattern and edge metal need to meet current uplift requirements. We pull the permits and make sure the inspection passes before we call the job done. Call (844) 797-8167 for a free estimate and we’ll walk you through what the scope looks like.
A properly installed metal system over a low-slope deck typically lasts 40 to 70 years in Paradise, and the fastening and corrosion details determine whether you get the long end of that. UV and thermal cycling will still tax the sealants at seams, so the real question is whether the slip sheet and edge metal protect the system from galvanic corrosion. Call (844) 797-8167 and we’ll tell you what to look for.
Written by the team at Shepherd & Sons Roofing Winchester.