Metal roofing
Architectural shingles
Tile roofing
GAF
Owens Corning
Flat & low-slopeFree roof inspection with deck photos before we talk money - GAF and Owens Corning certified installation
Fast, Reliable Metal Roofing Across Henderson
If you’re pricing a metal roof in Henderson, NV, the honest answer is that a standing seam install here runs roughly $16,000 to $34,000 for a typical 1990s tract home, and repair work runs far less. We work Henderson roofs constantly, from Green Valley to Anthem, and we know what the desert does to a roof underlayment and how tight-lot staging changes the number on the bid. Call (844) 797-8167 and a live person picks up, nights and weekends included. Our technicians have up to 30 years of experience, and every job carries the written 90-Day Done Right Promise.
Why Shepherd & Sons Roofing Winchester Is Henderson’s Preferred Metal Roofing Company
We’re locally owned and owner-operated, same address since 1996, and the name on the truck is the name on the license. Henderson homeowners have been burned by outfits that quote one number on the phone and another at the door, and that’s the reason we show photographs of the deck before we talk money. When you call, a real person answers. Not a call center, not a voicemail box. If you’re in 89011 near the lake or out in 89044 by Anthem, we’ll get a free second opinion on any written estimate you’ve already got, and there’s no trip charge inside our county.
On tight Henderson lots the crew is background-checked and the same faces show up on day two as day one. We install products from CertainTeed, Owens Corning, IKO and Atlas among others, so if you name the panel or shingle, we’ve likely set it. Our Metal Roofing team knows which corners matter out here: the underlayment, the clip spacing, and the flashing around the party wall. The nailing pattern earns the wind rating, not the shingle wrapper, and we don’t hide that.
Styles & brands we work with
- Architectural shingles
- Metal roofing
- Tile roofing
- GAF
- Owens Corning
- Flat & low-slope
Our Metal Roofing Services in Henderson
Standing Seam Metal Roof
Standing seam is the metal roof most Henderson homeowners ask about, and for good reason: concealed clips, no exposed fasteners sweating through the desert UV. On a Green Valley home we’re usually working around an existing tile roof, which means pulling the original tile first. A full standing seam install on a typical Henderson home runs $18,000 to $32,000 depending on square count and the pitch of the roof.

Metal Roof Repair
Most Henderson metal roof repair calls fall between $350 and $1,400. Heat-cycled sealants fail first, then panels loosen at the fastening points and ridge caps lift in the monsoon gusts. If you’ve got a standing seam panel that’s walked out of its clip after a wind event, we can reset it and re-seal without tearing the whole roof off.

Aluminum & Steel Roofing
For Henderson’s Mojave climate, aluminum and steel both work, but the choice matters. Steel takes a powder coat that holds color longer under 110°F summers; aluminum resists corrosion near the lake side of town. On a 1,800-square-foot Henderson home, an aluminum panel roof typically lands between $15,000 and $26,000 installed.

Corrugated Metal Roofing
Corrugated metal is the budget option for a shed, patio cover, or a single-story near downtown Henderson, often $8,000 to $14,000 on a modest footprint. It won’t match the lifespan of standing seam, but it sheds the monsoon rain and it’s easy to repair.
Trusted Brands We Service in Henderson
We install products from CertainTeed, Owens Corning, IKO, Atlas and others, and we service existing roofs regardless of who set them. We don’t claim to stock metal panels locally, and we won’t pretend a Henderson warehouse is around the corner. What we do is get the material ordered and the schedule tight, so a Henderson metal roof job doesn’t sit waiting three weeks for a panel. Name the manufacturer and we can usually tell you how it performs out here.
See the difference
Before
After
Before
After
Before
AfterCommon Metal Roofing Problems We See in Henderson Homes
- Heat-cycled underlayment. In Green Valley and Anthem, original tile underlayment from the 1990s has baked to a brittle crust, and once a new metal panel goes over it the whole system fails faster. We inspect the decking for heat damage before any panel is set.
- Loose panels after monsoon gusts. Seasonal winds peel ridge caps and work standing seam fasteners loose. A repair call after a wind event is one of the most common reasons Henderson homeowners call us.
- Finish damage on tight lots. With shared walls and limited staging, panels get cut and stored on the street where windblown debris and foot traffic can scuff the finish before installation.
- HOA color-match failures. Anthem and MacDonald Ranch architectural committees require exact color matches, and metal retrofits that skipped the tile-reuse step get rejected or delayed. We plan for the committee review in the quote.
Pricing for Metal Roofing in Henderson, NV
A typical standing seam metal roof in Henderson runs $18,000 to $32,000, and a corrugated install on a smaller footprint runs $8,000 to $14,000. Metal shingle and aluminum panel systems land between those two. What moves the number: the square count, the pitch, whether original tile has to be pulled and warehoused for HOA reuse, and how much staging the lot allows. A tight lot with a narrow side yard takes longer to load and protect than a wide-open driveway. We give a written line-item estimate, no-hassle upfront pricing, and a free second opinion on any bid you already have. Call (844) 797-8167 to schedule the estimate; it’s free.
We Also Serve Cities Near Henderson
We work Henderson and the towns around it. If you’re in Boulder City, Whitney, Paradise or Enterprise, we can get out to you without a trip charge inside our own county. Henderson is the anchor, and our Metal Roofing in Henderson hub covers the whole service area. Same 90-Day Done Right Promise anywhere we go.
Serving Henderson, NV – Our Local Coverage Area
We serve Henderson and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Metal Roofing in Henderson
HOA architectural committees in Anthem and MacDonald Ranch require exact tile color matches for any roof retrofit, so the project can’t start until the committee signs off. That means pulling and warehousing original concrete tiles before we set a single metal panel, and building the review timeline into the schedule. If you’re in one of those communities, call (844) 797-8167 and we’ll walk you through what the committee will look for.
Staging is the challenge. Tight lots with shared walls and narrow side yards leave little room for panels, and materials often get cut and stored on the street where windblown debris can damage the finish. We plan the staging around the driveway and street and set work hours so noise doesn’t land on a neighbor’s morning. It affects the quote as much as the square count does.
Because Henderson’s heat bakes ordinary underlayment to a brittle crust, and once that happens the panels over it fail. The lack of freezing temperatures means freeze-thaw isn’t the worry, but heat damage to sealants and underlayment is severe. We often use an ice and water shield in the valleys of a 1990s Green Valley home.
Monsoon gusts peel back ridge caps and loosen standing seam panels at the fastening points, so installation has to be built for wind. Clip spacing and the nailing pattern are what earn the wind rating, not the panel wrapper. Ask any bidder how many clips they’re counting and where they’ll sit.
Sometimes yes, sometimes it has to come off first, and the answer depends on the decking and the existing underlayment condition. On a 1990s Henderson home with baked-out underlayment, going over it usually traps the failure underneath. Call (844) 797-8167 for an exact quote after we’ve looked at the deck.
A roof is measured in squares, and on a Henderson lot that’s where the real planning starts. The original tile comes off, gets cataloged for the HOA, and the deck gets inspected for heat damage before any new underlayment goes down. That’s the work behind the number. Call (844) 797-8167 for a free estimate, and we’ll show you the deck photographs before we talk money.
Written by the team at Shepherd & Sons Roofing Winchester.