Metal roofing
Architectural shingles
Tile roofing
GAF
Owens Corning
Flat & low-slopeFree roof inspection with deck photos before we talk money - GAF and Owens Corning certified installation
Fast, Reliable Metal Roofing Across Boulder City
Metal roofing in Boulder City is a different job than it is in most of Nevada. Between the exposed lots up by Lake Mead, the wind that funnels through the valley, and a historic core where the visible roof profile gets reviewed before anyone orders a panel, the roof you end up with is decided long before the crew shows up. We’re Shepherd & Sons Roofing Winchester, and we know this town well enough to tell you what your roof actually has to meet before we talk price. Call (844) 797-8167 and a real person picks up, day or night, including after a wind event rolls through.
Why Shepherd & Sons Roofing Winchester Is Boulder City’s Preferred Metal Roofing Company
We’ve had the same address since 1996, same shop, same name on the truck, and that matters in a small town where the roofer you hire is the one you’ll see at the hardware store on Saturday. Out-of-state storm chasers come through Boulder City after every big wind and hailstorm, quote one number on the phone, and hand you a different one at the door. We publish our license number and our address, and Bill answers his own phone.
Boulder City customers call us back because we show you the deck photos before we talk money and put the 90-Day Done Right Promise in writing on every roofing job. One call brings Bill back. The guys on the roof are background-checked, and Bill’s own sons are up there with him. That’s not a call center you’re talking to at 9 p.m.
Our response to Boulder City is quick because we know the terrain: the 89005 core with its 1930s dam-boom bungalows, the 1950s to 1970s tract infill out toward the edges, the low-slope and shallow-pitch roofs that show up on both. When you call about a panel that lifted or a fastener that backed out, we can talk about what we’re likely to find before we ever get on the roof. That’s the local knowledge that saves you money.
Styles & brands we work with
- Architectural shingles
- Metal roofing
- Tile roofing
- GAF
- Owens Corning
- Flat & low-slope
Our Metal Roofing Services in Boulder City
Every job starts with a real look at your roof, deck, and drainage. Here’s what we do most in Boulder City.
Standing Seam Metal Roof
Standing seam is the right call for a lot of Boulder City homes because the concealed fasteners and raised seams handle wind uplift better than exposed-screw panels when the rating is set right. On the exposed lots near the lake, we spec the panel and clip pattern to the manufacturer’s wind rating and verify the decking underneath can hold it. If you’re in the historic district, the visible profile and color need to clear Historic Preservation Committee review first, and we’ll walk you through that.

Metal Shingle Roofing
Metal shingle gives you a look closer to the original roof while still cutting the UV and heat load that bakes asphalt in Boulder City summers. It’s a good fit on the 1950s-70s tract homes where you want the metal performance without a profile that stops at the historic review desk.

Corrugated Metal Roofing
Corrugated is the budget-friendly metal option, and it’s common on outbuildings and the more utilitarian roofs around Boulder City. We’re honest about the trade: exposed fasteners with butyl washers need re-checking after wind, and the washers dry out faster here than anywhere with real humidity.

Aluminum & Steel Roofing
We install both, and the choice comes down to your exposure and budget. Steel panels are strong and cost less up front, but they need a quality finish to survive the UV. Aluminum resists the heat and any salt-adjacent corrosion better and holds its finish longer. We’ll tell you which one earns its money on your roof.
Trusted Brands We Service in Boulder City
We install metal systems from names you can look up: Boral, Tamko, IKO, and Atlas among others. We don’t claim to stock their parts locally or carry them on a truck, because nobody can hold every panel and trim in every color. What we do is order exactly what your roof and your wind rating call for, and get it to site without turning a two-day job into a two-month one. When you ask “which panel and which rating,” we can answer.
See the difference
Before
After
Before
After
Before
AfterCommon Metal Roofing Problems We See in Boulder City Homes
- Wind uplift at the fasteners and side laps. The panels themselves usually don’t fail first; the seams and the fasteners do. High-wind events funneling through the valley strip screw-locked seams and shear fasteners before the metal ever bends.
- Panels telegraphing over 1930s sawn-lumber decking. On the dam-boom homes, the original decking flexes and the panels loosen and go uneven above it. That’s often a re-deck before any new panel goes down, not a patch.
- UV and heat baking out the butyl washers and sealants. With summers routinely at 105 to 110 degrees and intense UV, the sealants at penetrations, flashings, and valleys dry out and crack, opening a leak path that the next wind widens.
- Roofs lifting at the corners near the lake. On exposed lots close to Lake Mead, the panels lift at the corners first, even when the metal itself looks fine. That’s a fastening and lap spec issue, not a panel failure.
Pricing for Metal Roofing in Boulder City, NV
Metal roofing in Boulder City runs wide depending on the material and the deck underneath. A typical standing seam metal roof in Boulder City runs $17 to $28 per square foot installed, so a 1,800 square foot roof often lands between $30,000 and $50,000. Metal shingle usually runs $12 to $20 per square foot. Corrugated is the low end, $9 to $14 per square foot. Metal roof repair for a lifted panel, sheared fastener, or re-anchored flashing typically runs $450 to $1,800 depending on how much needs re-securing. What moves the number is the deck: a 1930s sawn-lumber deck that flexes may need re-decking, and historic-district review adds time rather than material. A free written, line-item estimate is yours before we touch anything.
We Also Serve Cities Near Boulder City
Boulder City isn’t the only place our crews work. We also handle metal roofing in Henderson, Whitney, Paradise, and Enterprise, and we’ll take a look at your metal roofing in Boulder City or any of these nearby towns. Call (844) 797-8167 to schedule.
Serving Boulder City, NV – Our Local Coverage Area
We serve Boulder City and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Metal Roofing in Boulder City
Yes. In the 89005 historic core, the visible roof profile, color, and material typically have to clear Historic Preservation Committee review before a panel is ordered, and that review, not the desert heat, is what sets your schedule. A job that’s a two-day tear-off elsewhere in town can stall for weeks waiting on approval. Using modern synthetic underlayment is fine; changing the visible profile of the roof is not. Call us before any deposit and we’ll walk you through what’s likely to get approved.
Your panel and fastening pattern have to meet the wind rating for your specific exposure, not a generic number off a brochure, and on the exposed lots near the lake that spec is tighter. The nailing and fastening pattern earns the wind rating, not the shingle or panel wrapper. A compliant quote will name the panel, the rating it’s installed to, and the fastener spacing. Ask any bidder that; if they can’t answer, that’s a warning. Call (844) 797-8167 for a second opinion on any written estimate, free.
A compliant quote names the panel and its wind rating, the deck inspection (including the possibility of re-decking over 1930s sawn lumber), the fastener and lap spec, the underlayment, the flashing and drainage details, and the permit. A cheap quote typically leaves out the deck repair, the permit, and the documented rating, which is what you’ll need later if you file a wind claim. We measure by the square; ask any bidder how many squares they counted. A free written estimate puts the numbers in front of you before anyone touches the roof.
It can help, because the paper trail is what the insurer looks at, not the roof itself. A permit, an inspection record, the manufacturer’s wind rating documentation, and a detailed install spec give you a file to show that the roof was built to the spec, which matters after a wind event and can matter at renewal. What the policy does is between you and your carrier; what we can do is hand you the documentation that backs the work. Call (844) 797-8167 and we’ll go over the record-keeping side before you sign a thing.
Because the fasteners and side laps fail first, not the metal. On exposed Boulder City lots near the lake, high-wind events funnel through the valley and work the fasteners and seams, and the panels begin to lift at the corners even though the metal itself is fine. A competent local pro inspects the deck and underlayment at the tear-off, re-secures the fasteners and laps to the manufacturer’s wind-rating spec, and replaces worn butyl washers and flashing boots at penetrations and valleys. Patching over a lift without fixing the spec just hands the problem to the next wind. Call (844) 797-8167 for a look before the next event.
Ready for a straight answer on what your metal roof needs? Call (844) 797-8167 to schedule your free estimate. A live person picks up, 24/7. We’ll show you the deck photos before we talk money, put the 90-Day Done Right Promise in writing on every roofing job, and there’s no trip charge inside our own county. Standing offers include $40 Off Any Repair Over $200 and a 10% senior and veteran discount. Ask anyone on your street; the name on the truck is the name on the license.
Written by the team at Shepherd & Sons Roofing Winchester.