Metal roofing
Architectural shingles
Tile roofing
GAF
Owens Corning
Flat & low-slopeFree roof inspection with deck photos before we talk money - GAF and Owens Corning certified installation
Styles & brands we work with
- Architectural shingles
- Metal roofing
- Tile roofing
- GAF
- Owens Corning
- Flat & low-slope
See the difference
Before
After
Before
After
Before
AfterFlat Roofing in Winchester, NV
Flat roofing in Winchester covers low-slope systems – built-up, modified bitumen, TPO, and rolled roofing – installed on homes and small commercial buildings across the valley. If you own a property with a low-slope section, you’ll need a roofer who knows how water actually moves across it, because flat roofs don’t shed water the way shingles do. Shepherd & Sons Roofing Winchester handles flat roofing as part of our Roof Replacement & Installation in Winchester work, and we bring the same crew, the same written 90-Day Done Right Promise, and the same upfront pricing to every low-slope job we take on. Call (844) 797-8167 and a real person picks up, day or night.
Flat roofs are common in Winchester on garage extensions, patio covers, additions, and mobile and manufactured homes, and they fail in ways that shingles don’t. Ponding water, seam splits, and UV damage from the desert sun all show up differently than a missing shingle. We look at the deck, the drains, and the flashing before we quote a number, and we’ll show you the photos so you understand exactly what we’re pricing.
A real person answers the phone 24/7 at Shepherd & Sons Roofing Winchester – not a call center, not voicemail. Same address since 1996, and the name on the truck matches the name on the license.
When You Need Flat Roofing
Most flat roof calls start with a leak a homeowner can’t chase down. Here’s what we see regularly in Winchester:
- Ponding water that stays more than 48 hours. In Winchester, we regularly see flat roofs that pond after a monsoon dump and never fully dry. Standing water finds every seam and pinhole in the membrane and works its way into the deck within a season or two.
- Blistered or alligatored surface on a built-up roof. The desert sun bakes a gravel-and-asphalt roof until it cracks into that alligator-skin pattern. Once it’s alligatoring across more than about a third of the field, patching stops paying for itself.
- Seam splits on rolled roofing or modified bitumen. A garage or addition roof that’s been up 15 to 20 years often shows splits at the seams where the laps have dried out. Wind-driven rain in Winchester pushes water sideways into those splits.
- Interior ceiling stains under a low-slope section. If you’re seeing a ring on the ceiling below the flat portion of the roof, the water has already traveled through the deck. It’s not going to stop on its own.
- Flashing pulling away at parapet walls or AC curbs. Rooftop equipment and parapet walls are where flat roofs leak most often in Winchester, because the flashing is what seals the transition and it’s also what takes the most thermal cycling.
- You’re tired of paying for patches every year. If you’ve had someone tarp or spot-seal the flat section several times and it keeps coming back, replacement usually costs less over the next five years than another round of patches.
Some flat roof problems really are repairable. A single seam split, a bad boot around a vent, or a small flash issue usually came from one specific failure. When we look at a roof, our job is to tell you honestly whether you’re looking at a repair or a replacement, and to show you the deck photos so you can see it yourself. A roof is measured in squares – ask any bidder how many they counted.
Our Flat Roofing Process
Every flat roofing job follows the same order, whether it’s a small patio cover or a full low-slope replacement:
- Walk the roof and the attic. We go up top, check the drains, check the flashing, and check the underside of the deck from inside where we can reach it. That’s how we figure out where the water is actually getting in, not where the stain is showing.
- Show you the deck photos before we talk money. You see the same images we do, so the scope of work matches the price on the page. This is the part where a lot of Winchester homeowners tell us they got burned by the last outfit that quoted one number on the phone and another at the door. We don’t work that way.
- Give you a written, itemized estimate. Square count, material spec, tear-off and disposal, and any deck repairs are all line items. No trip charge inside our own county, and the Free Second Opinion on any written estimate you’ve already received is yours to use.
- Tear off and inspect the deck. We remove the old membrane, check the sheathing for soft spots and rot, and replace what’s failed before any new material goes down. A flat roof over a soft deck is a leak waiting to happen.
- Install the system per the manufacturer spec. We install low-slope systems from IKO, Tamko, Boral, and other manufacturers we’ve been setting for a long time. The nailing pattern and the seam treatment earn the rating, not the wrapper on the roll.
- Walk it with you and hand over the paperwork. When the job is done, we walk the roof with you, show you the finished seams and flashing, and leave you the written 90-Day Done Right Promise. If it’s not done right, one call brings Bill back.
Our technicians have up to 30 years of experience on flat and low-slope roofs. Bill and his crew are the ones on the roof, not a rotating cast of subs.
Flat Roofing Pricing in Winchester
Flat roofing in Winchester typically runs $6.50 to $14.00 per square foot installed, depending on the system and how much deck repair turns up. That’s a wide range, and the honest reason is that two “flat roofs” can be very different jobs – a 400-square-foot patio cover over a sound deck is nothing like a full low-slope replacement with parapet flashing and two skylights to reflash.
| Line Item | Typical Winchester Range |
|---|---|
| Flat roof repair (seam, flashing, small patch) | $250 – $850 |
| Rolled roofing installation (per square, 100 sq ft) | $325 – $575 |
| Modified bitumen installation (per square) | $425 – $725 |
| TPO or single-ply flat system (per square) | $575 – $950 |
| Deck repair or sheathing replacement (per sheet) | $60 – $145 |
| Tear-off and disposal (per square) | $90 – $180 |
| Flashing at parapet wall or AC curb | $110 – $380 |
| Drain or scupper replacement | $145 – $475 |
A typical flat roof replacement in Winchester – say a 600-square-foot garage or addition over a sound deck – usually lands between $3,900 and $7,200 installed. Once you add deck repair, parapet flashing, and a couple of drains, a full low-slope job can run higher, and we’ll tell you exactly what’s driving that number on the written estimate.
What moves the price most in Winchester:
- System choice. Rolled roofing is the least expensive per square; modified bitumen and TPO cost more up front but often last longer in our sun. We spec the system for the slope and the traffic on the roof, not the cheapest thing on the shelf.
- Deck condition. Soft sheathing has to be replaced before any membrane goes down. We don’t hide that in the total – it’s a line item you can see.
- Flashings and penetrations. Every skylight, vent, AC curb, and parapet wall is a place water wants to get in. Each one is labor and material.
- Access and tear-off. Mansard walls, tight side yards, or an older roof with multiple layers to strip all add time and disposal.
Free estimate, no trip charge inside our own county, and if you’ve already got a written bid from someone else, bring it – our Free Second Opinion is standing and it’s no obligation. $40 Off Any Repair Over $200 is always available, and our Senior and Veteran 10% discount applies to every roofing job we do.
A quick note on scope: flat roofing and low-slope work should be done by a trained roofer, not a handyman with a bucket of mastic. Falls, hot-tar and torch-applied systems, and propane or AC-line penetrations are dangerous, and a bad seam over a soft deck can leak for years before you see it inside. If a bidder won’t go up on the roof before quoting, that’s your answer.
FAQs – Flat Roofing
How much does flat roofing cost in Winchester?
Flat roofing in Winchester typically runs $6.50 to $14.00 per square foot installed, and a 600-square-foot low-slope replacement usually lands between $3,900 and $7,200. The range depends on the system you choose, how much deck repair turns up during tear-off, and how many flashings and penetrations need to be reworked. Call (844) 797-8167 for an exact quote – estimates are free, and there’s no trip charge inside our own county.
How long does a flat roof last in Winchester?
A flat roof in Winchester generally lasts 10 to 20 years depending on the system. Rolled roofing tends to run the shorter end of that range; modified bitumen and single-ply TPO systems often hit the longer end. The desert sun here is the big variable. UV exposure breaks down asphalt-based membranes faster than in cooler climates, so a well-vented, properly flashed flat roof with good drainage lasts meaningfully longer than one that ponds. Call (844) 797-8167 and we’ll look at what you’ve got and give you an honest read on the remaining life.
Can you repair a flat roof instead of replacing it?
Sometimes, yes. A single seam split, a bad boot around a vent, or one flashing failure is usually a repair, not a replacement. Once the surface is blistering or alligatoring across more than about a third of the field, or the deck has gone soft in more than a spot or two, repair stops being the cheaper path. We’ll show you the deck photos and let you decide with real information. Call (844) 797-8167 for a straight answer – free estimate, no pressure.
Can you come out today for a flat roof leak?
Yes, we offer same-day and emergency response for active flat roof leaks when we can get there, and a live person answers the phone 24/7, including nights and weekends after a storm. A flat roof that’s letting water into the attic or ceiling is worth calling on right away – a slow leak becomes a rotted deck and a bigger bill. Call (844) 797-8167 and we’ll be there.
Do you install IKO and Tamko flat roof products?
Yes. We install low-slope systems from IKO, Tamko, Boral, and other manufacturers we’ve worked with for years. If you’ve already got a written bid specifying a particular product, our Free Second Opinion will tell you whether that system fits your roof’s slope and drainage. Call (844) 797-8167 to set it up.
What’s your warranty on flat roofing?
Every flat roofing job we do is backed by the written 90-Day Done Right Promise – if it’s not done right, we make it right, and one call brings Bill back. That’s in addition to whatever the manufacturer’s material warranty covers. Ask us to show you the promise in writing before you sign anything. Call (844) 797-8167 to talk through your roof.
Locally owned and owner-operated, with a published address and license number you can look up. If you’ve been quoted one price on the phone and another at the door, call us instead. Free estimate, no trip charge inside our own county, and a live person answers 24/7 at (844) 797-8167.
Written by the team at Shepherd & Sons Roofing Winchester, serving Winchester.