A Shepherd company - serving Winchester, NV

Boral Underlayment & Deck Repair in Winchester, NV

Architectural shinglesArchitectural shingles
Metal roofingMetal roofing
Tile roofingTile roofing
GAFGAF
Owens CorningOwens Corning
Flat & low-slopeFlat & low-slope
Every visit starts with

Free roof inspection with deck photos before we talk money - GAF and Owens Corning certified installation

We have financing partners for your new roof*On approved credit; ask us about your options
Get your free estimate

Boral Underlayment & Deck Repair: The Winchester Owner’s Guide

We install Boral-compatible underlayment and handle deck repair on Boral roofing systems across Winchester, and most of that work lands between $650 and $2,400 installed depending on how much decking has to be replaced. If you’re reading this because you’ve got a leak or a soft spot, call us and we’ll come look – we don’t charge a trip charge inside our own county. This is Winchester, and the pattern we see most is a 15- to 25-year-old Boral installation where the underlayment has dried out and cracked long before the tile itself failed.

Contractors using a mobile gutter machine to form custom seamless gutters in Winchester, NV

Call (844) 797-8167

Owners usually find it the same way. A brown ring shows up on a ceiling in late summer. Or a roofer walks the roof for an unrelated reason and finds the felt crumbled under a tile edge. The tile looks fine from the street. The layer under it does not.

Key Takeaways

  • Boral underlayment and deck repair in Winchester typically runs $650 to $2,400 installed.
  • The underlayment usually fails first, not the Boral tile.
  • Trusted underlayments carry 20- to 30-year ratings; in Nevada sun they often don’t make it.
  • Deck repair means replacing rotted sheathing, then re-underlaying, then re-setting tile.
  • We’re an independent roofer. We’re not affiliated with Boral.

Which Boral Models This Applies To

Boral makes several tile lines, and the underlayment work underneath is broadly the same on all of them: a high-temperature membrane or felt, then the tile, then the battens or direct-nail pattern the tile profile calls for. The lines that show up on Winchester roofs most often are Boral’s flat concrete and clay profiles, the ones set on 30-pound felt or a peel-and-stick high-temp membrane. When we come out to look, we check the label on the tile – it’s usually on the back of a piece near the ridge or the field, printed with the profile name and the series – and we measure the exposure and the pitch. That tells us which underlayment spec Boral required at install time for that profile.

Here’s the OEM-versus-aftermarket call. You do not need a “Boral-branded” underlayment. Boral doesn’t require its own membrane; it publishes a spec (a high-temp minimum, a weight, a permeability) and you meet it with a quality product. So the honest answer is: match the spec, not the logo. A good high-temp peel-and-stick or a code-compliant synthetic high-temp felt from a known manufacturer works. What you should not do is let anyone substitute a cheap standard felt under a Boral tile on a Winchester roof, because our summer heat eats it alive in a fraction of its rated life. Give us the tile profile name and we’ll tell you the minimum spec and quote the underlayment that meets it.

Explore

Styles & brands we work with

  • Architectural shingles
  • Metal roofing
  • Tile roofing
  • GAF
  • Owens Corning
  • Flat & low-slope

Signs Your Boral Underlayment & Deck Repair Is Failing

Five things we look for on a Winchester call. Each one points to a different layer of the problem, and the second tells you whether the deck itself is going.

  • Water stains on the ceiling below a tile field. The underlayment is the last line of defense under the tile, and once it’s cracked, water gets through the tile’s own weep channels and lands inside. Ceiling stains in Winchester usually trace back to failed felt, not a broken tile.
  • A spongy feeling or soft spot when we walk the deck. That’s rotted sheathing, which is deck repair, not just underlayment. It means water has been sitting on the plywood long enough to break down the wood fibers – common in Winchester after a few seasons of small, unnoticed leaks.
  • Granule-like grit in the gutters or on the ground under an eave. Failed high-temp felt sheds surface material as it dries out and cracks. If you’re finding grit in Winchester gutters that didn’t come from the tile, the underlayment is going.
  • Tiles sitting loose or out of line. When underlayment fails it can let water under battens and cause the nails to back out; tiles then lift. Loose tiles in a Winchester neighborhood after a windy spring often trace back to the layer below.
  • Active drip during a rain but no obvious broken tile. Water is getting under the tile and through the failed underlayment. This is the point where a repair becomes urgent, because each rain adds to the deck damage.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

Installed ranges for Boral underlayment and deck repair in Winchester run like this:

Work item Installed range
Underlayment replacement, small area $650 – $1,100
Underlayment replacement, larger pitched area $1,100 – $1,800
Deck repair (soft sheathing replacement) plus underlayment $1,400 – $2,400
Tile removal and reset included in above Yes

What drives the top of that range: how much tile has to come off to reach the failed underlayment, how many sheets of sheathing are soft, and whether the Boral profile is a flat or a high-profile tile that’s slower to reset. Trimming and re-setting the field tile is included. We quote it line by line – the underlayment, the decking, and the labor are separate lines. If the range moves once we open it up, that’s a conversation before we touch the deck, not after. And every roofing job we do is backed by our 90-Day Done Right Promise in writing: if it’s not done right, one call brings Bill back.

Call (844) 797-8167 for an exact quote. Estimates are free, and the second opinion on a written estimate is free too.

DIY or Call Us?

Here is the honest split. You can safely look at your ceiling stains, check your gutters for grit, and note where the drips are. You can read the tile label and write down the profile name for us. That’s it. What you should not do is break the seal on a Boral roof and start prying tile up to “take a quick look,” because lifting tile on a finished roof can crack a piece you can’t replace cheaply, and walking a pitched tile roof in Winchester heat is a fall risk. That’s a job for a trained professional with the right boots and harness. The same goes for pulling up sheathing once you’re into the deck – if any of the structure is soft, the whole repair becomes a safety question, not a maintenance one. A roofer should see it in person.

We do the looking for free. Call (844) 797-8167. It’s a live person, 24/7, not a call center and not voicemail.

FAQs

Need Roofing help nationwide? Licensed & insured · free written estimates
Call (844) 797-8167
Local Service Coverage

Request a Free Estimate in Winchester

Tell us what you need - Shepherd & Sons Roofing Winchester responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Send a Text
Call Now - 24/7 Dispatch