Architectural shingles
Metal roofing
Tile roofing
GAF
Owens Corning
Flat & low-slopeFree roof inspection with deck photos before we talk money - GAF and Owens Corning certified installation
Boral Roof Replacement & Installation in Winchester: What to Know First
We provide independent Boral roof replacement and installation in Winchester. Most Boral replacement jobs here run three to six days on site once materials land, and larger tile tear-offs swing longer. On price we’re upfront: a Boral job costs real money, we quote it line by line in writing before anyone touches your roof, and the number on the paper is the number you pay. As an independent Boral service provider, we’re not affiliated with or authorized by Boral – we install and replace their products because they hold up in our climate, and we back the work ourselves.

This page is for Winchester homeowners who already have Boral on the roof – clay or concrete tile, or the composite slate and shake lines – and need to know what fails, what it costs, and who to call. Part of our crew’s up-to-30-years of experience is with Boral specifically. Call (844) 797-8167 and a live person picks up.
How Boral Products Fail – and How We Fix Them
Boral makes good tile. The failures we see in Winchester aren’t usually the tile giving up – they’re what’s happening underneath it or at the edges. Here’s what we actually run into, line by line.
- Cracked field tile on the 700 and 900 Series flat profiles. Hairline and full cracks cluster on south-facing slopes, because summer sun here pushes surface temps past 150°F while our winter mornings dip below freezing – that daily expansion-contraction cycle works tile loose over time. We walk the whole field, tap-test, and replace cracked pieces with matching profiles rather than patching around them.
- Failed underlayment long before the tile does. Boral clay and concrete tile can last many decades, but the felt or synthetic underlayment beneath it often needs replacing years sooner. Walking on an old roof, hail, and our wind-driven rain all take a toll. When the underlayment is shot, the tile isn’t really the problem – we lift the field, replace the underlayment, and relay the tile.
- Slip and slide on steep tile. Tile on a steep pitch needs a proper mechanical fastening pattern and an underlayment rated for the exposure. When it’s installed short, tiles shift, valleys open up, and leaks follow. We re-set the field with the correct pattern for the pitch so it stays put.
- Ridge and hip mortar breaking down. Boral ridge and hip pieces are bedded in mortar, and our sun bakes that mortar until it cracks and the caps loosen. We re-bed and re-secure ridge and hip tile as part of a proper replacement, not just caulk over it.
- Composite slate and shake fading or chalking. Boral’s composite lines – the ones that mimic slate and cedar shake – can chalk and fade unevenly on the sun-facing slopes. We match profile and color as closely as the current line allows and tell you honestly where a perfect match isn’t possible.
Every one of these decisions gets shown to you with deck photos before we talk money. A roof is measured in squares – ask any bidder how many they counted on yours.
Styles & brands we work with
- Architectural shingles
- Metal roofing
- Tile roofing
- GAF
- Owens Corning
- Flat & low-slope
Our Boral Roof Replacement & Installation Process
- 1
The call and the look. Bill or one of the guys comes out, walks the roof, counts the squares, and photographs the deck and underlayment. You get the pictures before the number.
- 2
The parts decision. On Boral jobs, matching field tile, ridge, and hip pieces matter. We’ll tell you plainly where a true OEM match is available and where a quality match from the current line is the honest call – no upselling you into a full re-roof when a partial will do, and no pretending a mismatched tile looks the same.
- 3
Written, line-item quote. Flat pricing with no change orders once work starts. Free second opinion on any other written estimate you’re holding.
- 4
The tear-off and deck check. Old tile comes off, we inspect and replace any bad decking, and set the underlayment right for your pitch and exposure.
- 5
The install. Field tile, ridge, hip, and flashing set to spec for a Boral roof, with the fastening pattern that earns the wind rating – not the shingle wrapper’s claim.
- 6
The walk-through and the promise. We clean up, walk it with you, and every job carries our 90-Day Done Right Promise in writing – one call brings Bill back.
See the difference
Before
After
Before
After
Before
AfterWhat Boral Roof Replacement & Installation Costs in Winchester
Boral isn’t the cheap route, and we won’t pretend it is. Here’s the honest ballpark for Winchester, priced on the roof you actually have:
| Boral Job | Typical Winchester Range |
|---|---|
| Partial tile replacement (field repair, matching pieces) | $600 – $2,500 |
| Underlayment replacement under existing tile (lift and relay) | $9,000 – $18,000 |
| Full Boral tile roof replacement (standard pitch) | $18,000 – $38,000 |
| Composite slate or shake replacement | $15,000 – $30,000 |
| Steep-pitch or complex roof (multiple valleys, hips) | adds 20% – 40% |
What moves the price: square count, pitch, how much tile is reusable, deck condition, and whether you’re matching an old color. No trip charge inside our own county, and the quote is free. Call (844) 797-8167 for an exact number.
Why Winchester Homeowners Call Shepherd & Sons Roofing Winchester for Boral Work
We’ve had the same address since 1996, and Bill’s name is on the license and on the truck. The guys on the roof are his own sons and a background-checked crew – not a subcontractor you’ll never see again. Storm chasers roll through Winchester after every hail event and quote one price on the phone and another at the door. Ask them where their address is.
We install Boral because it holds up, and we also set GAF, Owens Corning, and CertainTeed – so when a Boral match is the wrong call for your roof, we’ll say so. Live person answers the phone 24/7, including after a storm. Standing offers: $40 off any repair over $200, free second opinion on any written estimate, and a 10% senior and veteran discount. The nailing pattern earns the wind rating, not the brand name.
FAQs
No – a proper replacement installed to Boral’s specification keeps the product warranty intact, and that’s part of why we install to spec. Keep your paperwork and ask any installer how they’ll document the install; we hand it over in writing.
Often yes, sometimes close but not exact, and we’ll tell you which before you commit. Older Boral color lines get discontinued, so we check current availability and show you samples rather than promise a perfect match.
Repair if the tile is the only issue and the underlayment is sound; replace when the underlayment under the field is failing, which is common once a tile roof gets on in years. We’ll show you the deck photos and give you both numbers so you decide.
Most full Boral replacements run three to six days on site, longer for large or steep roofs. We give you a realistic window up front, not a promise we can’t keep.
Yes – we pull the permits and the work gets inspected, and we handle that as part of the job. It’s one more reason the price doesn’t move once work starts. Call (844) 797-8167 and we’ll walk you through it.
If your Boral roof in Winchester is cracked, leaking, or just past its underlayment, call (844) 797-8167 for a free estimate. A live person answers, we’ll come look, and we’ll show you the deck photos before we talk money – same address since 1996, name on the truck, 90-Day Done Right Promise in writing.
Written by the team at Shepherd & Sons Roofing Winchester, serving Winchester and nearby areas.