Metal roofing
Architectural shingles
Tile roofing
GAF
Owens Corning
Flat & low-slopeFree roof inspection with deck photos before we talk money - GAF and Owens Corning certified installation
Styles & brands we work with
- Architectural shingles
- Metal roofing
- Tile roofing
- GAF
- Owens Corning
- Flat & low-slope
See the difference
Before
After
Before
After
Before
AfterFlashing Repair in Winchester, NV
Flashing repair in Winchester typically costs $250 to $650 for a single leak point, and most of that work gets done in a day. Flashing is the metal – sometimes a membrane or a heavy rubber boot – that seals the seams where your roof meets something it can’t cover: chimney walls, vent pipes, skylights, the valley where two roof planes meet, and the edge along your fascia. When those seals fail, water finds a path inside. We fix flashing because it’s the leak we get called about most, and because it’s the repair that saves a homeowner from a much bigger bill. To reach the crew that handles it, call (844) 797-8167.
Shepherd & Sons Roofing Winchester has been working on roofs since 1996, and our technicians bring up to 30 years of experience to a flashing call. We’re locally owned and owner-operated, which means Bill’s name is on the license and Bill answers his own phone. We don’t send a call center. A live person picks up 24/7, including the night after a monsoon blows through.
If your flashing problem is one piece of a larger leak, start with our Roof Repair page to see how the full repair works. If it’s isolated to a seam, pipe boot, or chimney, you’re on the right page.
One thing worth knowing about Winchester: our valley heat is brutal on sealant and on the rubber boots around vent pipes. A boot that would last fifteen years in a cooler climate can crack at year eight here. The sun does the damage long before the rain exposes it. Most of the flashing failures we fix in Winchester were already failing in July and just didn’t show up as a stain on the ceiling until the first real winter storm.
When You Need Flashing Repair
Flashing doesn’t usually fail all at once. It gives a few warnings first, and most homeowners catch at least one of them. Here’s what to look for.
- A brown ring or stain on a ceiling or wall. Water tracks along rafters before it drips, so the stain is often a few feet from the actual leak. If the ceiling stain sits near your chimney, a skylight, or an exterior wall, suspect flashing first.
- Rust streaks or dark lines on the shingles near a chimney or vent. That discoloration is water running where it shouldn’t. On IKO and Atlas shingles we see this most along the uphill side of a chimney, where the backer flashing sits.
- Crumbling or missing sealant around pipe boots. Those little rubber collars on your vent pipes take full afternoon sun. When the rubber splits or the collar pulls loose, a two-inch gap can let in more water than you’d think.
- Daylight visible in the attic near a valley or roof edge. If you see light coming through where two roof planes meet, the flashing there isn’t seated against the underlayment anymore.
- Water in the garage after a storm. Garage roofs are low-slope, and the flashing along the wall where the garage meets the house is a common failure point in Winchester’s older neighborhood stock.
- Storm damage. A good wind can peel back edge flashing or lift a valley that was already loose. If a storm just came through and you’re hearing water, don’t wait for it to dry out and get worse.
Any of these is worth a look. None of them is worth climbing up and investigating yourself – roofs are steep, the heat is real, and the fix requires knowing how the layers go together. Call us and we’ll come take a look.
Our Flashing Repair Process
Here’s how a flashing call goes from start to finish. We keep it plain because you deserve to know what’s happening on your roof.
- You call and a live person answers. Not a form, not voicemail. You tell us what you’re seeing, and we ask a few questions to understand where the water might be coming from. We’ll be there on a schedule that works for you – no trip charge inside our own county.
- We get up there and look at the whole roof, not just the leak. We check the flashing at every penetration, the valleys, the edge metal, and the boots. Sometimes the leak you’re seeing started six feet away. We take photos while we’re up there.
- We show you what we found before we talk money. This is the part that matters. We’ll show you the deck photos, point to what’s failed, and explain what it’ll take to fix it right. No price on the phone that changes at the door.
- We do the work. Depending on the failure, that means pulling and replacing the flashing, reseating a boot, redoing the counter-flashing at a chimney, or rebuilding a valley. We use materials that match what’s already on your roof – name the shingle and we’ve likely set it.
- We test it and clean up. We check our work with a hose before we call it done, and we don’t leave shingle scraps or nails in your yard. The guys on the roof are background-checked, and Bill’s own sons are often among them.
- We back it in writing. Every roofing job we do is covered by the 90-Day Done Right Promise. If something isn’t right, one call brings Bill back.
That’s the whole process. No surprises, no add-ons you didn’t agree to. Ask anyone on your street – the name on the truck is the name on the license.
Flashing Repair Pricing in Winchester
Here are honest ranges for the most common flashing jobs. Every roof is different, and we won’t quote you a firm number until we’ve seen it, but this gives you a realistic picture of what to expect.
| Job | Typical Range | Notes |
|---|---|---|
| Pipe boot replacement (one vent) | $175 – $325 | Most common fix. Often done same day. |
| Chimney counter-flashing repair | $350 – $750 | Depends on chimney size and whether the flashing is embedded in the masonry. |
| Valley flashing repair or rebuild | $400 – $900 | More involved. Requires opening the valley and reseating the metal. |
| Skylight flashing re-seal or replacement | $300 – $700 | Replacement runs higher if the skylight unit itself failed. |
| Edge metal / drip edge repair | $250 – $550 | Often bundled with fascia work. |
What drives the number up or down: how many leak points there are, how high and steep the roof runs, whether the flashing failure damaged the deck underneath, and whether we can match your existing shingle. On a Tamko or Boral roof, matching is usually straightforward. On older or discontinued shingles, we’ll tell you what we can and can’t do before we start.
Two standing offers always apply, no fine print games. If you’ve got a written estimate from another roofer, we’ll give you a free second opinion – bring it and we’ll tell you straight whether it’s fair. And we take $40 off any repair over $200.
Every repair quote is free, and we don’t charge to come out inside our own county. That’s how it should be.
FAQs – Flashing Repair
How much does flashing repair cost in Winchester, NV?
Flashing repair in Winchester typically runs $175 to $900 depending on the job – a pipe boot is at the low end, a valley rebuild at the high end. Most single-point repairs land between $250 and $650. Call (844) 797-8167 for an exact quote. Estimates are free.
Can you fix my flashing the same day?
In many cases, yes. Pipe boot replacements and simple reseal jobs are usually done same day if we can get there before the weather turns. More involved jobs like a chimney counter-flashing rebuild may need a second visit if we need to match a specific material. Call (844) 797-8167 and we’ll tell you honestly what’s possible.
How do I know if my flashing is bad or if it’s the shingles?
You often can’t tell from the ground, and that’s the point. Both flashing failures and shingle failures show up as ceiling stains or attic moisture. The way to know is to get up on the roof and look at the seams. We’ll show you the deck photos before we talk money, so you can see exactly what failed. Call (844) 797-8167 to set up a look.
Is it cheaper to repair the flashing or replace the whole roof?
If the flashing is the only problem, repair is almost always the cheaper answer and the right one. We only recommend a full replacement when the flashing failure is a symptom of a roof that’s already past its service life – worn shingles, soft deck, widespread granule loss. We’ll tell you which one you’re looking at, and we don’t upsell a replacement onto a roof that’s got years left.
Contact Shepherd & Sons Roofing Winchester
If water is getting in where it shouldn’t, don’t wait for the next storm to make it worse. Call (844) 797-8167 for a free estimate on flashing repair in Winchester. A live person answers 24/7, Bill will come see it, and you’ll know the number before anyone touches your roof. Same address since 1996. Ask the storm chasers where theirs is. See our home page for what else we do, and check out Roof Repair in Winchester if you’ve got a bigger leak to sort out.
Written by the team at Shepherd & Sons Roofing Winchester, serving Winchester.