A Shepherd company - serving Winchester, NV

Boral Shingle Repair in Winchester, NV

Architectural shinglesArchitectural shingles
Metal roofingMetal roofing
Tile roofingTile roofing
GAFGAF
Owens CorningOwens Corning
Flat & low-slopeFlat & low-slope
Every visit starts with

Free roof inspection with deck photos before we talk money - GAF and Owens Corning certified installation

We have financing partners for your new roof*On approved credit; ask us about your options
Get your free estimate

Boral Shingle Repair: The Winchester Owner’s Guide

Boral shingle repair in Winchester typically runs $180 to $340 for a targeted repair (a handful of shingles, flashing reset, or a vent re-seal) and $450 to $900 when a full field section needs replacing. That’s installed pricing, parts and labor, not a parts-only sticker. We come out, show you the deck photos, and give you a written line-item number. People in Winchester usually find the problem after a hard wind or a monsoon, when they see a few shingles on the lawn – or a brown water stain on the ceiling of the front bedroom. Boral makes several lines of shingles and shakes, and how we repair them depends on exactly which one is on your roof.

professional metal roofing service in Winchester, NV

Call (844) 797-8167

Which Boral Models This Applies To

Boral’s shingle and shake lines each have their own profile, thickness and nailing spec, so matching the wrong one leaves a visible patch or a weak wind rating. In Winchester, the Boral products we see most on roofs are the concrete and clay shake-style tiles and the asphalt lines where Boral was the manufacturer. The fastest way to identify yours is to look at the underside of a shingle edge from the roof slope or a soffit. Look for a stamp, a printed line on the backing, or a mill mark. If there’s no marking, measure the exposed height and thickness of a shingle, and count the tab spacing. A Boral concrete tile runs heavier than an asphalt shingle – 9 to 12 pounds per square foot for some products, versus 2 to 3 pounds for asphalt – so the replacement has to match weight and profile, not just color. On the OEM-vs-aftermarket question: for a Boral concrete line, matching the OEM product is usually the only way to get an exact profile. On Boral asphalt lines, a quality aftermarket match in the same architectural grade works well, and it can save you 15 to 25 percent on the material. We install products from GAF, CertainTeed, Owens Corning, IKO, Atlas, Tamko and Boral, so when you name your shingle, we can tell you whether a compatible match exists.

Explore

Styles & brands we work with

  • Architectural shingles
  • Metal roofing
  • Tile roofing
  • GAF
  • Owens Corning
  • Flat & low-slope

Signs Your Boral Shingle Repair Is Failing

  • Cracked or chipped tabs along a roof plane. In Winchester’s dry, hot summers, the asphalt mat on Boral asphalt shingles dries and becomes brittle, so a sharp temperature swing can crack a tab. A single cracked tab is a repair, not a whole-roof job.
  • Granules in the gutter and downspout. Granule loss means the shingle is shedding its weather layer. A little at the end of a shingle’s life is normal, but a steady line of grit after every rain is the first sign it needs attention.
  • Curled or lifted shingle edges. Curling usually means moisture is trapped underneath – often from a failed underlayment or a bad nail. On a Boral concrete line, a lifted shake can mean a broken fastener or a cracked underlayment edge.
  • Missing or slid-down shingles after a wind event. A shingle that lifted and slid is a sign that the nailing pattern didn’t hold. We check the nail placement, not just the missing shingle.
  • A brown ceiling stain or a wet attic deck board. This is the sign you don’t ignore. A stain means water is getting past the shingle, and it can start small and grow after the next rain.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

For a Winchester Boral shingle repair, plan on $180 to $340 for a spot repair, and $450 to $900 for a larger field-section replacement. That’s the installed number, and it includes matching material, underlayment, nailing, and cleanup. The range is driven by the product line, the roof pitch, how many shingles are affected, and whether the repair touches a valley or flashing. You’ll get the number in writing, line by line, before anyone touches your roof. Our 90-Day Done Right Promise covers the work, and if it’s not right, one call brings Bill back. Same address since 1996.

DIY or Call Us?

An owner can safely check a few things from the ground: a visual on missing shingles, a look at the gutter for granule build-up, and a ceiling stain inside. Where DIY goes wrong on a roof is the walking. Most roofs here are steep, and a fall is the real risk – not the shingle work. Don’t climb a roofer’s pitch to pull a shingle or check a nail. Call us at (844) 797-8167 and we’ll come out, look at the deck and the shingle up close, and give you a free second opinion on any estimate. No trip charge inside our own county.

FAQs

Need Roofing help nationwide? Licensed & insured · free written estimates
Call (844) 797-8167
Local Service Coverage

Request a Free Estimate in Winchester

Tell us what you need - Shepherd & Sons Roofing Winchester responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Send a Text
Call Now - 24/7 Dispatch