Tile roofing
Architectural shingles
Metal roofing
GAF
Owens Corning
Flat & low-slopeFree roof inspection with deck photos before we talk money - GAF and Owens Corning certified installation
Tamko Tile Roofing in Winchester: What to Know First
We provide independent Tamko tile roofing in Winchester, and most repairs are finished in a day while full tile roof replacements typically run three to seven days depending on square count and weather. We’re honest about price up front: tile work on a Tamko roof isn’t the cheapest roof on the block, and we’ll tell you what it costs before anyone touches a tile. We’re Shepherd & Sons Roofing Winchester, locally owned and owner-operated since 1996, and we answer our own phone day or night. Most Winchester homeowners call us because a leak showed up over a bedroom and they want a straight answer, not a sales pitch.

This page is for Tamko tile roof owners in Winchester who need to know how their specific roof fails, what a real repair should involve, and roughly what it costs. Call (844) 797-8167 and a live person will pick up.
How Tamko Products Fail – and How We Fix Them
- Underlayment wear before the tile shows it (Tamko tile underlayments). Tile is the visible layer, but the underlayment underneath is what actually keeps water out. In Winchester’s high-desert swings – 100°F summers and nights that drop 40 degrees – the underlayment dries out and cracks years before the tile looks bad. We pull the tile, inspect the felt, and replace the underlayment where it’s failed rather than patching over it.
- Tile slippage and broken corners (barrel and concrete tile over Tamko underlayment). After a hard freeze-thaw cycle in Winchester, the fastening and tile edges take the stress. We regularly see cracked barrel tiles at the eave in older neighborhoods, and the real cause is usually a mix of thermal movement and a fastening pattern that was never tight enough. Our guys re-seat and replace broken tile and re-fasten the field.
- Flashing leaks at walls and valleys (any Tamko tile assembly). Tamko roofing under tile is only as good as the flashing transitions around chimneys, walls, and valleys. Winchester’s wind-driven rain pushes water sideways into soft metal, and that’s where a lot of “mystery” leaks start. We replace the flashing with the tile lifted, not caulked over.
- Lifted or ponding areas near the ridge (Tamko tile on lower slopes). On shallow slopes, the underlayment has to be overlapped correctly or water backs uphill. We see it on additions and porch covers around Winchester where someone used a low-slope product the wrong way. We correct the laps and add a proper underlayment where the slope calls for it.
- Old repairs gone wrong (mixed materials over Tamko). The worst leaks we pull are usually under a previous patch – the wrong sealant, a mismatched tile, or a repair done by someone who didn’t lift the tile. We strip the bad patch and rebuild the assembly the right way.
Styles & brands we work with
- Architectural shingles
- Metal roofing
- Tile roofing
- GAF
- Owens Corning
- Flat & low-slope
Our Tamko Tile Roofing Process
- 1
Free diagnosis and second opinion. We come out, walk the roof, and take photos. If you have a written estimate already, we’ll look at it with you at no charge – no trip charge inside our own county.
- 2
We show you the deck before we talk money. You see the photos and the actual failure, not a guess on a clipboard.
- 3
Parts decision. We talk through OEM versus quality aftermarket underlayments and flashing and explain the trade-offs in plain language. Name the Tamko line and we’ve likely set it.
- 4
The repair or replacement. Tile lifted only where needed, underlayment and flashing replaced properly, tile re-seated and fastened to spec.
- 5
The water test and walkthrough. We check the repair with water where it applies and walk you through what we did.
- 6
The written 90-Day Done Right Promise. If it’s not right, we make it right in writing. One call brings Bill back.
See the difference
Before
After
Before
After
Before
AfterWhat Tamko Tile Roofing Costs in Winchester
Real ranges for the most common Tamko tile roof jobs we see in Winchester:
- Targeted tile roof repair (broken tile, flashing, small leak): $350 – $1,200.
- Underlayment replacement on a single slope: $1,800 – $4,500.
- Full tile underlayment replacement: $9,000 – $18,000.
- Full tile roof replacement (concrete or barrel): $18,000 – $45,000+ depending on square count and tile type.
What moves the price: how many squares you have, tile type (barrel costs more than flat concrete), how much tile is salvageable, roof pitch and access, and whether flashing needs full replacement. $40 Off Any Repair Over $200, a Senior and Veteran 10% discount, and free second opinions on any written estimate are always available. Call (844) 797-8167 for a free estimate before anyone touches your roof.
Why Winchester Homeowners Call Shepherd & Sons Roofing Winchester for Tamko Work
We’re locally owned and owner-operated, same address since 1996, and Bill’s name is on the work and the license number. A live person answers the phone 24/7 – including after a storm – not a call center. The crew is background-checked and uniformed, and Bill’s own sons are on the roof with him. Our technicians have up to 30 years of experience, and they know how Tamko tile assemblies actually hold up in Winchester’s climate. We install and service products from GAF, Owens Corning, and CertainTeed too, so if your roof has more than one brand on it, we can work across all of them. Same address since 1996. Ask the storm chasers where theirs is.
FAQs
Does repairing my Tamko roof affect the manufacturer warranty? It can, if the repair uses the wrong underlayment or flashing or skips proper fastening. We do warranty-safe work and won’t void your coverage, and as an independent Tamko service provider we’re not affiliated with or authorized by Tamko.
Can you get parts for my Tamko tile roof? Yes. Tamko tile underlayment and flashing products are available, and we’ll tell you honestly when a quality aftermarket part is the smarter call and when OEM matters.
Should I repair or replace my Tamko tile roof? If the tile is sound and only the underlayment or flashing failed, repair usually wins. If the tile itself is cracked across the field or the roof is past its service life, replacement makes more sense. We’ll show you the photos and give you the straight answer.
How fast can you get out to Winchester? We answer the phone 24/7 and can usually get out within a day or two for a diagnosis. Call (844) 797-8167 and we’ll get you on the schedule.
Will the price change once work starts? Not on our estimate. We give written, fixed pricing with no change orders – if we find something behind the tile we didn’t see, we stop and show you before we touch another thing.
Call (844) 797-8167 for your free estimate. We’ll come out, walk the roof, show you the photos, and tell you what it costs before anyone touches your Tamko roof.
Written by the team at Shepherd & Sons Roofing Winchester, serving Winchester and nearby areas.