Metal roofing
Architectural shingles
Tile roofing
GAF
Owens Corning
Flat & low-slopeFree roof inspection with deck photos before we talk money - GAF and Owens Corning certified installation
Fast, Reliable Metal Roofing Across Sunrise Manor
Metal roofing in Sunrise Manor, NV, runs $13,500 to $34,000 for a typical 1,500 to 2,200 square foot ranch home, and most of that money buys tear-off, deck repair and a proper drainage plan rather than the panels themselves. We know this township well: the low-slung tract houses off East Charleston Boulevard, the older ranch homes up around Nellis and Carey, and the acreage lots out toward the desert edge where shops and detached garages outnumber the houses. Yes, same-day fixes aren’t realistic on a planned metal roof, and anyone promising that is selling you something. What we do promise is a documented scope, a county permit pulled in your name, and a free estimate with no trip charge inside Clark County. Call (844) 797-8167 and a live person picks up.
Why Shepherd & Sons Roofing Winchester Is Sunrise Manor’s Preferred Metal Roofing Company
Sunrise Manor homeowners don’t need a national storm chaser with a magnet sign on the door. They need a roofer whose license number you can look up and whose name you’ll see again at the hardware store. Ask anyone on your street – the name on the truck is the name on the license, and that’s how a company like ours earns the next door instead of buying it with a mailer.
Familiarity with the area matters more here than in a shingle subdivision. Sunrise Manor is an unincorporated Clark County township, and that single fact changes how permitting, inspections and well-and-septic setback checks run compared with work inside Las Vegas or North Las Vegas city limits. Our technicians have up to 30 years of experience, and the people doing the measuring know which county desk a metal roof submittal lands on. Every quote is written, line-itemed, and fixed: no change orders after the panels arrive. We back every job with our written 90-Day Done Right Promise – if something’s not right, one call brings Bill back. And because neighborhood roofs here are flat, tar-and-gravel ranches rather than pitched shingle homes, a metal roof bid that ignores the parapet detail is a bid you should walk away from.
Styles & brands we work with
- Architectural shingles
- Metal roofing
- Tile roofing
- GAF
- Owens Corning
- Flat & low-slope
Our Metal Roofing Services in Sunrise Manor
Every job we scope in Sunrise Manor starts the same way: we measure the deck, look at the fascia and soffit, and check whether equipment and staging actually fit on the lot before quoting. Here’s what we install and repair.
Standing Seam Metal Roof
Concealed clips, no exposed fasteners, and panel runs cut to exact length so you’re not fighting seams every eight feet. On a half-acre lot with a detached shop, panel lengths are ordered to the foot because a long material haul into an open-lot property means one shot at the delivery. We set clip spacing for the thermal cycling this desert throws at a roof – summer highs routinely top 105°F, and that expansion has to go somewhere.

Metal Roof Repair
Most metal roof repair calls in Sunrise Manor aren’t on the house at all – they’re on the outbuildings. UV-baked butyl washers back out of shop-roof screws, and the first monsoon microburst of July or August sends water through every one of them. We replace fasteners with proper gasketed screws, reseal penetrations, and reset seams that have opened at the eave or ridge.

Metal Roof Coating
Not every flat roof needs a full tear-off. Coating can buy years on a built-up roof that’s UV-chalked but still sound at the deck, provided we verify the substrate first. Where an aging tar-and-gravel roof is too far gone, we’ll tell you straight and quote a metal transition instead of coating over a problem.

Aluminum & Steel Roofing
Corrugated and ribbed steel panels are the workhorse choice for detached shops and garages around Sunrise Manor. Aluminum panels make sense where salt air and desert grit do their worst on fasteners. We work with panels from CertainTeed, Owens Corning and IKO, and we set the substrate right before we ever lay panel – high-temp underlayment on the deck, metal counterflashing at every transition.
Trusted Brands We Service in Sunrise Manor
We install products from CertainTeed, Owens Corning, IKO, Atlas, GAF, Tamko and Boral, and if you name a panel profile we’ve likely set it. We don’t claim to keep parts or panels stocked locally – panels are ordered to your job’s exact dimensions, which is why the measurement visit matters. Between the county permit timeline and the material lead time, a metal roof in Sunrise Manor typically wraps in three to five weeks from signed quote to final inspection. That’s not a reason to grab the first bid; it’s a reason to get the scope right the first time.
Common Metal Roofing Problems We See in Sunrise Manor Homes
- UV-degraded butyl washers on shop roofs. The washer gaskets on corrugated shop panels dry out and back out over years of desert sun, and the leaks show up during monsoon microbursts rather than in a steady rain. We replace the fasteners and re-seal, usually in one visit.
- Thermal expansion on long standing seam runs. Clip spacing that wasn’t set for 105°F swings shears fasteners or opens seams at the eave and ridge. Proper clip count is the difference between a metal roof that lasts and one that rattles loose in year five.
- Parapet and scupper transitions on the ranch house. When a 1960s flat-roof ranch gets a metal upgrade, the roof-to-parapet seam is where old tar flashing has to come out completely. A transition that patches over baked tar will leak. We use metal counterflashing and ice-and-water shield instead.
- Rotted fascia and soffit hiding under decades-old gravel. On these ranch homes, the soffit often carries water damage the previous owner never saw. We check it before we quote because discovering rot mid-install changes the number, and we’d rather show you the deck photos first.
See the difference
Before
After
Before
After
Before
AfterPricing for Metal Roofing in Sunrise Manor, NV
Metal roofing ranges in Sunrise Manor run $13,500 to $34,000 for a typical single-story home, with standing seam at the top of that band and corrugated or ribbed panels for a detached shop running $3,200 to $7,500. What moves the number most: tearing off decades-old tar-and-gravel, replacing rotted fascia or soffit, ordering panels cut to exact length for a long haul, and the drainage plan required when an open lot has to shed monsoon water away from the house and the well. We give a written, line-itemed quote – fixed price, no change orders – and pull the county permit. Call (844) 797-8167 for a free estimate; a free second opinion on any written bid you already have is standing policy, and there’s no trip charge inside Clark County.
We Also Serve Cities Near Sunrise Manor
We work metal roofing calls throughout Sunrise Manor and the surrounding east valley, including Whitney, Winchester, Las Vegas and North Las Vegas. If you’re on the edge of the township and not sure which jurisdiction issues your permit, call and we’ll sort it out. Our Metal Roofing team handles the whole east side.
Serving Sunrise Manor, NV – Our Local Coverage Area
We serve Sunrise Manor and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Metal Roofing in Sunrise Manor
Yes. Sunrise Manor is an unincorporated Clark County township, so metal roof permits and inspections run through Clark County’s building department rather than a city office. On acreage lots with a well and septic system, the county health district also checks setbacks before the panel layout gets finalized. We handle that permitting and the inspections; call (844) 797-8167 with your address and we’ll confirm which process applies.
Usually not directly. Most tar-and-gravel roofs on Sunrise Manor’s 1960s ranch homes are past the point where a metal layer can go over the top – the deck has to be exposed for proper underlayment and clip installation. Standard practice is a full tear-off to the decking, a check of fascia and soffit for rot, then high-temp underlayment and standing seam with concealed clips. Call (844) 797-8167 for a free inspection; we’ll show you the deck before we talk money.
Exposed-fastener corrugated or ribbed panels are the practical choice for outbuildings. They shed heat well, cost less per square than standing seam, and can be repaired fastener by fastener when the washers dry out. If the shop sits on an open lot with long access, the material gets ordered to exact length because re-staging a second delivery on a desert lot is painful. Call (844) 797-8167 and we’ll look at the shop and the house together.
Well, if it’s detailed for it. Summer highs regularly hit 105 to 115°F, and flat or low-slope roofs here fail from UV degradation and thermal cycling rather than storm damage. Metal handles that better than tar-and-gravel, but only with correct clip spacing and a proper parapet and scupper transition, because the July-to-September microbursts are when an aging roof actually leaks. Call (844) 797-8167 and we’ll walk your roof and tell you what needs replacing before monsoon season.
Ask whether they’ll pull the county permit, whether the quote is fixed or estimated, and whether they’ll account for well and septic setbacks and open-lot drainage. Ask how many squares they counted – a roof is measured in squares, and a bidder who can’t tell you is guessing. And ask whether they’ll show you the deck photos before they talk money. We answer all of it, written, on the quote. Call (844) 797-8167 for a free estimate or a free second opinion on a bid you already have.
Get Your Free Metal Roofing Estimate in Sunrise Manor
Whether you’re replacing a baked-out tar-and-gravel roof on a 1960s ranch home off East Charleston or fixing UV-worn panels on a shop out toward the desert edge, we’ll look at the deck, check the setbacks, and quote a fixed price in writing. No trip charge inside Clark County, seniors and veterans get 10% off, and a live person answers the phone at (844) 797-8167 – call today to schedule your free estimate.
Written by the team at Shepherd & Sons Roofing Winchester.