Metal roofing
Architectural shingles
Tile roofing
GAF
Owens Corning
Flat & low-slopeFree roof inspection with deck photos before we talk money - GAF and Owens Corning certified installation
Fast, Reliable Metal Roofing Across Las Vegas
Metal roofing in Las Vegas isn’t the same job it is anywhere else. Your roof sits under 300-plus days of sun, gets cooked at 115°F in July, and then has to hang on through a monsoon downburst that can peel a badly attached panel right off the deck. We’re Shepherd & Sons Roofing Winchester, and we know the northwest valley, the older tract streets, and the flat-to-low-slope roofs out here well enough to tell you straight whether metal is the right call for your house and what it will take to do it to code. Call (844) 797-8167 and a live person picks up, day or night.
Las Vegas roofs take a beating that most roofing pages never talk about. In ZIPs like 89108, 89129, and 89149, you’ll find rows of 1980s-to-2000s tract homes: stucco-clad, slab-on-grade, and topped with flat or very low-slope roofs often finished in sprayed polyurethane foam or modified bitumen rather than shingles. That foam shows alligator-cracking sun damage long before it leaks. Then the first big monsoon storm in July or August rolls through, finds a clogged scupper or a seam that failed, and suddenly the roof that looked fine is dripping into the ceiling. Metal is a real upgrade for this housing stock, but only when it’s engineered and attached for the wind zone we actually live in. That’s the part cheap bids skip, and it’s the whole reason to read the rest of this page.
Why Shepherd & Sons Roofing Winchester Is Las Vegas’s Preferred Metal Roofing Company
Shepherd & Sons has stayed locally owned and owner-operated since 1996, and we’ve built a name here the slow way, one roof at a time. Out-of-state storm chasers come through after every big blow, quote one number on the phone and another at the door, and disappear. We don’t work that way. A real person answers the phone 24/7, background-checked crews do the work, and every roofing job carries our written 90-Day Done Right Promise. One call brings us back, and that’s in writing.
We keep our address and license number published because we want you to be able to check them. That’s the difference between a handshake and a brochure. When we come out to look at your metal roof in Las Vegas, we’ll show you the deck photos before we talk money. A roof is measured in squares, so ask any bidder how many they counted, and expect a straight answer. Metal work is judged on the paperwork as much as the panels, and we hand over the engineered attachment schedule and the inspection record so you have it in your file.
Styles & brands we work with
- Architectural shingles
- Metal roofing
- Tile roofing
- GAF
- Owens Corning
- Flat & low-slope
Our Metal Roofing Services in Las Vegas
Standing Seam Metal Roof
Standing seam is the go-to for Las Vegas homes that are moving off an aging foam or modified bitumen roof, because the concealed clips and raised seams handle the sun and wind better than exposed-fastener systems. On a low-slope retrofit, the panels have to be rated to the local wind speed, with new underlayment, drip edge, and flashing at every penetration and valley. That’s the difference between a roof that lasts and one that oil-cans after the first downburst.

Metal Roof Repair
Plenty of Las Vegas metal roofs we look at don’t need replacing. They need the fasteners, seams, and flashing fixed. When panels were attached with the wrong clip spacing, they lift and back out screws, and that shows up fast after a monsoon. We find the failure, correct it to the right spec, and walk you through the deck condition so you know what you’re dealing with.

Aluminum & Steel Roofing
Aluminum and steel panels both work here, and each has a place. Aluminum shrugs off the dry desert air well; steel brings strength where wind uplift is the concern. We install products from CertainTeed, Owens Corning, and IKO, so name the panel or system you’re considering and we’ll talk through what fits your house and your budget.

Corrugated Metal Roofing
Corrugated panels are the economical choice for sheds, patios, and outbuildings around Las Vegas, and they hold up fine when they’re installed correctly. The catch is the exposed fasteners. UV and the daily thermal swing here break down the washers and seals over time, so the panel gets loose and leaks at the penetrations. We set them right and tell you when a repair is cheaper than a replacement.
If you want the full picture of what we offer, our Metal Roofing team lays it all out.
Trusted Brands We Service in Las Vegas
We install panels and components from certain manufacturers we trust to hold up in this climate: CertainTeed, Owens Corning, IKO, and Atlas. We don’t claim to keep a local parts warehouse, because we don’t. What we do is order the right system for your roof and get it delivered on schedule, so your Las Vegas metal roof goes on without a long stall. If you’ve been quoted a brand you don’t recognize, ask us about it. We’ll tell you what we know and what we don’t. Naming the shingle or panel is a good place to start a conversation. If we’ve set it before, we’ll say so.
Common Metal Roofing Problems We See in Las Vegas Homes
- Panels lifting in the wind zone. When panels are attached with the wrong clip spacing for the 115-mph wind zone, they oil-can or back the screws out. We see it most often after a monsoon downburst, on roofs that looked fine the week before.
- Failed fasteners from sun and heat. Exposed fasteners on corrugated or metal shingle panels degrade from UV and the daily thermal cycling here. Over a few summers, the seals go, the panels loosen, and water finds the penetrations.
- Fascia and soffit that can’t carry the load. On many 1980s-to-2000s stucco homes, the existing fascia and soffit aren’t structurally adequate for metal without added blocking. Skip that step and the panel edges lift under wind load.
- Moisture trapped under the old roof. Retrofitting over a foam roof that’s already cracked or holding moisture traps it underneath. We check the deck before we ever talk about panels on top.
See the difference
Before
After
Before
After
Before
AfterPricing for Metal Roofing in Las Vegas, NV
You deserve real numbers, so here are ballpark figures for the Las Vegas market. A typical standing seam metal roof on a valley tract home runs about $14 to $22 per square foot installed, which puts most full roofs in the $18,000 to $40,000 range depending on size and complexity. Metal roof repair, like re-clipping panels or replacing failed fasteners and flashing, usually runs $400 to $2,500. Aluminum and steel panel systems fall in the middle of the standing seam and corrugated prices. Corrugated installations are on the lower end, closer to $9 to $15 per square foot. What moves the number: the deck condition, whether fascia blocking is needed, the panel system, and the engineering to meet the wind rating. Estimates are free, and we’ll give you a written line-item quote with no trip charge inside our own county. Call (844) 797-8167 for your free estimate.
Do You Pull the Permits for Metal Roofing in Las Vegas?
Yes. Metal roofing in Clark County needs its own permit, and the package includes the engineered attachment schedule that documents the wind rating. A metal roof is treated differently than a shingle or foam tear-off because the county wants to see the engineering behind the attachment. We handle the permit and the inspection, and we hand you the record. A cheap bid often skips this step to keep the price down, and that leaves you exposed at claim time. Call (844) 797-8167 and we’ll walk you through what your job needs.
We Also Serve Cities Near Las Vegas
If you’re just outside the Las Vegas city line, you’re still on our map. We work all around the valley, including Las Vegas, Winchester, North Las Vegas, Sunrise Manor, and Paradise. Same written promise, same engineered paperwork, wherever your roof sits. Call and we’ll confirm your area and set up a time to take a look.
Serving Las Vegas, NV – Our Local Coverage Area
We serve Las Vegas and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Metal Roofing in Las Vegas
Most of the Las Vegas Valley sits in a 115-mph basic wind zone under the county’s adopted code, so the panels and their attachment must be engineered and documented to that threshold. Clark County’s building code adopts the 2018 International Residential Code, and the wind-speed maps govern how the metal gets attached. That matters for permit approval and for insurance claims after a monsoon downburst. Call (844) 797-8167 and we’ll tell you what your roof specifically needs.
Yes, it does. Metal roofing triggers its own permit package, and the county expects the engineered attachment schedule that shows the wind rating. A shingle or foam roof may not need that same documentation. We pull the permit, pass the final inspection, and give you the record so you have proof of compliant installation if you ever need it. Estimates are free, so call (844) 797-8167 to get started.
Sometimes, but not always. It depends on the deck condition and whether the old foam is holding moisture or already cracked. A qualified installer checks the decking for dry rot and verifies the fascia and soffit can carry the new panel system’s wind uplift before recommending an overlay. On a lot of northwest valley homes, the smarter move is a proper tear-off. We’ll show you the deck photos and give you a straight recommendation. Call (844) 797-8167 for a free estimate.
Documented compliance is what proves your roof met the required wind rating when you file a claim. If panels fail after a downburst and you can show the engineered attachment schedule and the inspection record, you’re in a much stronger position than a homeowner holding a receipt with no paperwork. Some insurers also weigh roof age and installation standards when setting premiums. Keep your permit record. Call (844) 797-8167 and we’ll explain what your job’s paperwork will include.
A compliant quote includes the engineered attachment schedule, the panel system and its wind rating, new underlayment, drip edge, and flashing at every penetration and valley, plus added blocking if your fascia can’t carry the load. A low bid often leaves out the engineering, the blocking, and the permit, which is exactly what costs you later. We give you a written line-item quote, and we’ll give you a free second opinion on any written estimate you’ve already got. Call (844) 797-8167 to schedule yours.
Written by the team at Shepherd & Sons Roofing Winchester.